0 Cart
Added to Cart
    You have items in your cart
    You have 1 item in your cart
      Total

      Assembling the Genoa/AWD Euroscooter

      Assembling the Genoa/AWD Euroscooter


      1 minute read

      Assembling the Genoa/AWD model Euroscooter

      If you need guidance on the process of assembling or disassembling the Genoa or Genoa AWD model Euroscooter, please follow along with the video and the written step by step instructions below.


      Step by Step Instructions

      1. Remove pin and t-bolt from the base of the neck where it meets the scooter.

      2. Unfold the scooter

      3. Insert handlebars as shown and tighten and secure clamp to hold them in place.

      4. Lift and straighten handlebars at the elbow joint, securing the clamp upward and locking it in place.

      5. Lift scooter neck to align the holes at the base where it meets the deck, the same holes the pin and t-bolt were removed from, and reinsert the pin and screw in the t-bolt back in place as shown.

      6. Insert the seat post

      7. Insert the seat, aligning and securing it with the pin.

      8. Attach each armrest by inserting it into the shown area and tightening the bolts to hold them in place. 

      « Back to Blog